Pour en savoir plus sur la manière dont Epson traite vos données personnelles, consultez notre Déclaration sur les informations personnelles.
Saisissez vos coordonnées ci-dessous et un expert Epson vous contactera :
If the printer does not attempt to print when a print job is sent, or the print job is not fully completed, then there may be a communication issue between your computer and the printer.
A communication-related problem may also be the cause of other printing issues, including poor print quality.
Follow the steps below to identify and resolve the issue:
Power is indicated by a green, red or amber light on the printer's control panel.
If the product is powered off, check the power cable is connected and it is on at the power source.
Hold down the power button for five seconds to power it on.
If it will not power on, see There appears to be no power to the Printer - all lights are off. What can I do?
If an error message is displayed on the control panel refer to the user guide supplied with your product or search the Epson website for a solution.
You will need to clear all errors before you can print again or undertake further troubleshooting.
If there is power to the printer and the printer's control panel is not displaying any error lights or error messages, perform a printer operation check (self test).
You will need to load plain A4 paper into the printer's paper sheet feeder.
Refer to the user's guide for the printer for instructions.
See the instructions relevant for the results of the printer operation check.
Reconnect the printer to the computer and follow the next series of steps to troubleshoot the issue.
Perform the check again. If it fails again, the printer may require a service. Contact Epson - no further troubleshooting is necessary at this point.
Click on the tab that relates to the connection method which is being used to connect to the printer and follow the troubleshooting steps.
If the document has not printed it may be that the printer is 'Paused', 'Offline' or documents are stuck in the print queue.
Any documents in the queue will need to be cleared. Having jobs stuck in the queue could cause incorrect or garbled characters on printouts.
See How to check the driver and print queue status in Windows for assistance.
Check that the printer is set as the default in the Devices and Printers folder.
Refer to How to Set the Default Printer in Windows for instructions.
Make sure the correct printer port is selected for your connection method. Use the article How to access the printer ports in Windows for guidance.
If the correct port and driver are in use and the printer appears ready to print, test this by printing a Test Page. See How to Print a Test Page in Windows for guidance.
Cancel all documents. For instructions see How to cancel print jobs in Windows, then move to the next step.
Uninstall and reinstall the printer driver, to restore the driver to its default settings. Follow the instructions below:
If you are using the printer via USB. Only power on the printer and connect the USB cable from the printer to the USB port on the computer when prompted to by the installation program. Follow the on-screen prompts to complete the installation.
A été ajouté à votre panier